Use only tested or original cables for stable connect.
1.Erase in the tool and Reconnect *
2. Turn ON wifi on your device
3. Go to the login password page
4. Check connection with Mac in the iTunes or Finder
5.Tick checkboxes Lock Ota / Lock Erase as you wish
6. Press Start
7.❗️Wait until all applications on your phone are installed via wifi❗️
8 .If device asks in popups - press OK
9. Press Activate, wait “Device successfully Activated” message.
After successfull activation device will reboot, or reboot it manually
*optional if previous attempts were unsuccessful
Some trouble shooting Smd Pro
⁃ Always connect iTunes or Finder before start application to check connection between Mac and iPhone. You need to see login / password page.
⁃ Update drivers to latest . If asks to install new drivers you should install it . Reboot Mac after updates.
⁃ Use approved macOS Mojave to Monterey ( Ventura / Sonoma should work too but not tested well )
⁃ Turn OFF all applications that use internet
Error -3 : check cable , use only original or tested cables , without connectors etc
Error -12 : ask admin to fix manually
Crash application: check ALL previous points ⬆️ , check internet , try vpn , go and install 1.1.1.1 if you have bad connection . Check your Mac’s drivers